. in. (3290mm)
Variable Shade Auto-Darkening Welding Filters

ArcOne brings you the technology of the Industrial and the viewing area of the Xtreme with the NEW Industrial Xtreme™ auto-darkening filter. A 40% larger viewing area WITH an external command center for infinite shade selection 7-14 and sensitivity. The Industrial Xtreme also features an internal grind mode and 3 LCDs for optical clarity.

Other features include:

  • 4 independent sensors
  • 12.6 sq. in. active viewing area
  • Switching speed of 0.1 milliseconds
  • Solar powered - no batteries to change
  • Water and dust resistant
  • Dark to light state delay 0.1 and 2 secs
  • Up to shade 16 UV/IR protection

 

ArcOne's New Xtreme™ Auto-Darkening filters have an UNBELIEVABLE 40% LARGER viewing area than any other auto-darkening filter on the market today. Available in a Single Shade 10.5 or Variable Shade 9-12 filter. A specialized TIG filter with an additional MIG/Stick mode and built-in sensitivity and delay. FOUR factory tuned independent sensors located in all four quadrants of the filter, provide maximum arc detection so the filter will stay dark as needed and minimize any chance of total sensor block. Freatures a power off mode specifically designed to maintain the light state when grinding.

.

Other features include:

  • 4 independent sensors
  • 12.6 sq. in. active viewing area
  • Switching speed of 0.1 milliseconds
  • Solar powered - no batteries to change
  • Water and dust resistant
  • Dark to light state delay of 0.1 and 2 secs
  • Up to shade 16 UV/IR protection
  • Light state 3

Go To Top


The Industrial 5x4" and 4x5" offers infinite shade selection between 7-14 along with sensitivity and grinding. All from an external command center. Perfect for all production welding aplcations. The 2x4" filter provides the perfect economical general-purpose 9-13 variable shade solution. A potentiometer on the outside of the helmet allows customized shade selection without the need to remove the helmet or gloves minimizing down time and improving safety. Other features include:

Other features include:

  • 7.30 sq. in. of viewing area on the 5x4" and 4x5"
  • 5.25 sq. in of viewing area on the 2x4"
  • Dark to light state delay of 0.2 seconds on the 2x4" filter and 0.1 and 2 secs. on the 4x5" and 5x4" filters.
  • 2 independent sensors
  • Switching speed 0.1 Milliseconds
  • Shade 3 light state
  • Water and dust resistant
  • Solar powered - no batteries to change
  • Up to shade 16 UV/IR protection at all times

Go To Top